Search found 6 matches
- Fri Apr 02, 2010 7:11 pm
- Forum: Technical Support Forum
- Topic: Link and Zelda Saving
- Replies: 8
- Views: 10886
replace the timekeeper battery
Hi, just look around the forum for info on changing the timekeeper chip or battery. It looks quite hard to do but is in fact fairly easy to do. What have you got to lose if it doesn't work anyway? I managed to do mine with no problems. I removed the top layer of plastic off the chip to expose the ba...
- Fri Apr 02, 2010 6:58 pm
- Forum: Technical Support Forum
- Topic: CD-i 350 issues
- Replies: 1
- Views: 4260
disc won't spin
Hi,
check that the disc carrier hasn't been pushed up or down on it's spindle.
If it's to low the disc will drag and if too high the lazer won't focus correctly and think theres no disc in and will stop the motor.
Paul.
check that the disc carrier hasn't been pushed up or down on it's spindle.
If it's to low the disc will drag and if too high the lazer won't focus correctly and think theres no disc in and will stop the motor.
Paul.
- Sat May 16, 2009 8:25 pm
- Forum: Philips CD-i Forum
- Topic: CDi 450: Timekeeper battery tip
- Replies: 12
- Views: 17277
timekeeper fault
Hi, I have just looked at your pics and they are good. That is pretty much what I did to mine, although mine is now working. The memory full please delete files usually indicates a flat batttery so I would recheck all your soldering for a bad joint and that your replacement battery is at 3.3 volt Th...
- Mon Mar 02, 2009 11:37 pm
- Forum: Technical Support Forum
- Topic: CD-I 450 memory issue
- Replies: 4
- Views: 7947
time keeper battery
Basically the time keeper chip has a battery built into the top of it. You can't see the battery because it is embedded in the body of the chip and wasn't designed to be replaced. However I read a thread on this site by terratron and he describes how to do it in detail. I followed his advice and hav...
- Sat Oct 21, 2006 10:06 pm
- Forum: Technical Support Forum
- Topic: replace battery in NV-RAM ST timekeeper MK48T08B-15
- Replies: 15
- Views: 37356
timekeeper battery
Hi, I didn't replace the entire chip just the battery. It is fairly easy to do, just requires a little confidence. I used a dremel with a 2mm bit in it. But instead of drilling into the chip I used the side of the bit to par away the surface of the chip starting along the short edge of the chip. I s...
- Sat Oct 21, 2006 7:54 pm
- Forum: Technical Support Forum
- Topic: replace battery in NV-RAM ST timekeeper MK48T08B-15
- Replies: 15
- Views: 37356
timekeeper repair
Thanks Terratron,
I have just used your guide and sucessfully repaired the chip on my 205 cdi machine.
Thank you very much!!
I have just used your guide and sucessfully repaired the chip on my 205 cdi machine.
Thank you very much!!