HELP! Need cdi TV output cable! $$$

americancdier · Post by **americancdier** » Wed Mar 01, 2006 11:54 pm

Thank you for viewing my post. I'm in despersate need of a output cable from my magnavox CDi to any form of input, preferably component, composite(RCA), or S-video. But any kind will work. I will pay for the unit and shipping to the States. PLEASE! I have a CDi and 56 games, 3 controllers, and an airmouse...but no way of playing. Thanks again and any help is appreciated!

Chris

Post by **Bas** » Thu Mar 02, 2006 8:11 am

you mean something like this? (only with less cables!)

cdifan · Post by **cdifan** » Thu Mar 02, 2006 4:44 pm

The cable in the picture is a SCART connector, also called EURO-connector for a reason. I don't think a US TV will have support for it.

You should be able to get a so-called "CVBS with Audio" cable at any reasonable electronics store... One side will have three small connectors like the ones abundantly shown in the picture (yellow = composite video signal, white = left audio signal, red = right audio signal), the other side would have a S-connector or whatever you need for your TV.

americancdier · Post by **americancdier** » Fri Mar 03, 2006 12:39 am

I have a multimedia projector capable of international signal inputs. What connectors were manufactured for our CDi's? I am looking for the highest res capable cable. Thanks!

Post by **Bas** » Tue Mar 14, 2006 11:24 am

Do USA televisions don't have a SCART connector? Do they have an alternative connector?

Also, do these SCART connectors offer a higher resolution rather than the analogue 'tulip' connectors (or how are they called!)