mechanism for cdi360

If you encounter any problems with your CD-i system or have difficulty operating some software for CD-i then post your problems here. With help from the CD-i community and the vast resources hosted on the CDinteractive network we should be able to solve any trouble your experiencing.
Post Reply
steelballs
Burn:Cycle Activated
Posts: 5
Joined: Mon May 11, 2009 9:43 pm
Contact:

mechanism for cdi360

Post by steelballs » Tue Jun 16, 2009 10:23 pm

I have a cd-i 360 that isn't working, it has been looked at and apparently the mechanism needed is used in other philips hardware, the CDM9. Does this ring any bells with anyone here, I wouldn't know where to start searching!

User avatar
TheCDiFanboy92
Softech Recruit
Posts: 82
Joined: Thu Mar 05, 2009 3:09 pm
Location: Grathem, limburg, Netherlands

Re: mechanism for cdi360

Post by TheCDiFanboy92 » Wed Jun 17, 2009 12:21 am

steelballs wrote:I have a cd-i 360 that isn't working, it has been looked at and apparently the mechanism needed is used in other philips hardware, the CDM9. Does this ring any bells with anyone here, I wouldn't know where to start searching!
i should try google mayby you find it ;)

steelballs
Burn:Cycle Activated
Posts: 5
Joined: Mon May 11, 2009 9:43 pm
Contact:

Post by steelballs » Wed Jun 17, 2009 6:28 am

Thanks, but I have tried google in the past and ended up seeing old posts on technical or audio forums from years ago or there seems to be variations on the CDM9, such as CDM9 pro and CDM9/44, CDM9/50, CDM9/65 and so on.

I was hoping someone here on the forums has enough knowledge on the hardware side to point me in the right direction or maybe knows exactly which model is in the 360?

Any help would be greatly appreciated! :D

XCLTempesT
Karmic Church Disciple
Posts: 186
Joined: Mon Jul 18, 2005 2:44 pm

Post by XCLTempesT » Tue Jun 30, 2009 1:16 pm

I believe all the earlier cdi players use the same CDM-9/44 laser mechanism.

If the mechanism is the problem, you could buy a cheap old cdi-210/00 or cdi-210/20 and transplant the mechanism.
But some sellers also sell the CD mechanism on ebay as parts (most of the times this is more expensive).

CDM-9/44 is very common in earlier cd players. Also I think the other CDM-9 versions are technically interchangeable, but I don't know for sure.

Are you sure the mechanism is the problem? the memory battery is the biggest cause for problems, and cause all kinds of erratic behavior as the data is corrupted just before the battery dies completely.

steelballs
Burn:Cycle Activated
Posts: 5
Joined: Mon May 11, 2009 9:43 pm
Contact:

Post by steelballs » Tue Jun 30, 2009 5:45 pm

If that's the case I'll open up one of the spares I have lying around for a look to see if it is the same.

I was lucky enough to be able to take it to someone who had or still does(can't remember the exact details anymore) work for philips in the repair department. He fixed my fw380i for me and couldn't fix the portable but told me it needed a new mechanism so I'm inclined to believe him. It starts up fine but won't read discs.

Would it start up at all if the problem was the memory battery? sorry for my technical ignorance and thanks for your help.

Post Reply