CD-i 350 issues

If you encounter any problems with your CD-i system or have difficulty operating some software for CD-i then post your problems here. With help from the CD-i community and the vast resources hosted on the CDinteractive network we should be able to solve any trouble your experiencing.
Post Reply
Burn:Cycle Activated
Posts: 1
Joined: Sun Feb 14, 2010 2:10 am
Location: Bedford, IN

CD-i 350 issues

Post by girlracer » Sun Feb 14, 2010 2:14 am

I got a portable 350 off of ebay for $30 shipped. I already have a 450.

The issue with the 350 is that the disc won't spin (it will spin for a second but nothing loads or no errors). My dad has been an electronics tech for 20 years. I didn't know if it could be the battery issue that I hear about, but I don't see how that would make the disc not spin.

Burn:Cycle Activated
Posts: 6
Joined: Tue Aug 29, 2006 1:46 am
Location: Glossop England

disc won't spin

Post by rockclimber » Fri Apr 02, 2010 6:58 pm

check that the disc carrier hasn't been pushed up or down on it's spindle.
If it's to low the disc will drag and if too high the lazer won't focus correctly and think theres no disc in and will stop the motor.

Post Reply