The CD-i IR Set , how does it work?

If you encounter any problems with your CD-i system or have difficulty operating some software for CD-i then post your problems here. With help from the CD-i community and the vast resources hosted on the CDinteractive network we should be able to solve any trouble your experiencing.
Post Reply
User avatar
CD-i 450
Burn:Cycle Activated
Posts: 27
Joined: Thu Jul 16, 2009 2:03 am
Location: Sweden

The CD-i IR Set , how does it work?

Post by CD-i 450 » Wed Jul 21, 2010 7:54 pm

Image

I recently bought a 22ER9054 - CD-i IR Set without any CD-i Commander and on this page http://www.icdia.co.uk/accesories/point ... l#22er9055 it mentions that the CD-i Commander uses the RC6 standard, so that means other non-cdi remotes will work with it too?, i've tried a few remotes without any success:/

On the side of the IR box is a switch that says REL/ABS , are those two different IR systems?.

User avatar
Devin
CDinteractive Admin
Posts: 2153
Joined: Sun Jun 19, 2005 1:51 pm
Location: England
Contact:

Post by Devin » Sat Jul 24, 2010 9:21 pm

As far as I know it was only designed with the commander in mind.

No clue what the switch is for however!

User avatar
Bas
CDinteractive Admin
Posts: 3041
Joined: Mon Jun 20, 2005 11:14 am
Location: the Netherlands
Contact:

Post by Bas » Sun Jul 25, 2010 5:35 am

rel/abs sounds like 'relative/absolute'...I can make a guess: Perhaps it changes the way of measuring when there are, for example, a lot of incandescent lamps in the room, which can disturb the IR measuring. Switching to relative might do the trick. But that's a guess!

As far as I know the kit was indeed made specifically for the Commander for use with the 450 player, as these didn't have a IR sensor built in.

User avatar
CD-i 450
Burn:Cycle Activated
Posts: 27
Joined: Thu Jul 16, 2009 2:03 am
Location: Sweden

Post by CD-i 450 » Sun Jul 25, 2010 11:43 am

Bas wrote:rel/abs sounds like 'relative/absolute'...I can make a guess: Perhaps it changes the way of measuring when there are, for example, a lot of incandescent lamps in the room, which can disturb the IR measuring. Switching to relative might do the trick. But that's a guess!.
Yeah I think your right about that , makes sense.

I'm gonna go digging for some RC6 remote controls and hope that they work, very interesting site on the subject: http://www.sbprojects.com/knowledge/ir/rc6.htm

User avatar
CD-i 450
Burn:Cycle Activated
Posts: 27
Joined: Thu Jul 16, 2009 2:03 am
Location: Sweden

Post by CD-i 450 » Wed Jul 28, 2010 4:19 pm

I went ahead and bought the Logitech Harmony 300i and impressively enough it has a few cd-i models in it's database including the 450, sadly it doesn't seem to have the up,down,left,right settings in the database but currently I can pause/start/skip the waynes world 2 vcd using the harmony on the cd-i! :).

Image

http://www.youtube.com/watch?v=-y1qdGBwliI
http://web.archive.org/web/200204200430 ... rc_77.html

proxy10

Post by proxy10 » Thu Jun 30, 2011 7:44 am

thx u info ,d

User avatar
Trev
Sum Zero Barman
Posts: 289
Joined: Fri Oct 20, 2006 10:22 pm

Post by Trev » Thu Jun 30, 2011 2:39 pm

A year old post bumped w/broken English spam ... :roll:

Post Reply