CD-i 210 IC bridge cable and PSU question
Posted: Fri Jan 25, 2019 7:46 pm
I just picked up a CD-i 210 and found this wire bridging pin 10 and 12 on this chip:
I tried searching for the description on the IC, but I have had no luck finding a datasheet. I have a Service Manual for the 210 as well, but I can't seem to find anything on this chip in there either I think.
Anyone who has an idea what this bridge does, let alone maybe have more info on this IC like a datasheet?
---
Edit: I just measured the PSU, the green cable measures 23.2v DC, it turns on just fine, but what component would need that kind of voltage? The servo of the disc drive uses 12v or 9v max I can imagine...
Thanks in advance CD-i fans.
I tried searching for the description on the IC, but I have had no luck finding a datasheet. I have a Service Manual for the 210 as well, but I can't seem to find anything on this chip in there either I think.
Anyone who has an idea what this bridge does, let alone maybe have more info on this IC like a datasheet?
---
Edit: I just measured the PSU, the green cable measures 23.2v DC, it turns on just fine, but what component would need that kind of voltage? The servo of the disc drive uses 12v or 9v max I can imagine...
Thanks in advance CD-i fans.