I have a homemade converter that allows me to use sega genesis controllers on cdi. so far all i've tested is the 6 button genesis, and it works great. but when i plug it into the splitter, it no longer registers?
Also, if i were playing mad dog mcree, and i used the sega genesis "justifyer" gun, is there any chance it would work?
controller conversioin questions
-
- Burn:Cycle Activated
- Posts: 49
- Joined: Thu Oct 15, 2009 4:59 am
- CD-inexperience
- Burn:Cycle Activated
- Posts: 25
- Joined: Sun Jun 07, 2009 8:52 am
-
- Burn:Cycle Activated
- Posts: 49
- Joined: Thu Oct 15, 2009 4:59 am
- Bas
- CDinteractive Admin
- Posts: 3041
- Joined: Mon Jun 20, 2005 11:14 am
- Location: the Netherlands
- Contact:
The CD-i Gun works a little different compared to other console guns... The gun does not work like a normal lightgun, e.g. by timing the electronbeam from the TV-screen. The CD-i lightgun works with an IR-sender in the small box and a directional IR-receiver in the gun itself (like with the Wii-remote). From the angle and intensity of the received IR it is calculated where the gun is pointing at. (So instead of a more standard lightgun, a CD-i lightgun will also work with LCD TV's and beamers.)
That genesis bazooka you're talking about works like a standard lightgun, so it doesn't work.
That genesis bazooka you're talking about works like a standard lightgun, so it doesn't work.
-
- Burn:Cycle Activated
- Posts: 49
- Joined: Thu Oct 15, 2009 4:59 am