If you encounter any problems with your CD-i system or have difficulty operating some software for CD-i then post your problems here. With help from the CD-i community and the vast resources hosted on the CDinteractive network we should be able to solve any trouble your experiencing.
-
CD-i 450
- Burn:Cycle Activated
- Posts: 27
- Joined: Thu Jul 16, 2009 2:03 am
- Location: Sweden
Post
by CD-i 450 » Wed Jul 21, 2010 7:54 pm
I recently bought a 22ER9054 - CD-i IR Set without any CD-i Commander and on this page
http://www.icdia.co.uk/accesories/point ... l#22er9055 it mentions that the CD-i Commander uses the RC6 standard, so that means other non-cdi remotes will work with it too?, i've tried a few remotes without any success:/
On the side of the IR box is a switch that says REL/ABS , are those two different IR systems?.
-
Devin
- CDinteractive Admin
- Posts: 2153
- Joined: Sun Jun 19, 2005 1:51 pm
- Location: England
-
Contact:
Post
by Devin » Sat Jul 24, 2010 9:21 pm
As far as I know it was only designed with the commander in mind.
No clue what the switch is for however!
-
Bas
- CDinteractive Admin
- Posts: 3041
- Joined: Mon Jun 20, 2005 11:14 am
- Location: the Netherlands
-
Contact:
Post
by Bas » Sun Jul 25, 2010 5:35 am
rel/abs sounds like 'relative/absolute'...I can make a guess: Perhaps it changes the way of measuring when there are, for example, a lot of incandescent lamps in the room, which can disturb the IR measuring. Switching to relative might do the trick. But that's a guess!
As far as I know the kit was indeed made specifically for the Commander for use with the 450 player, as these didn't have a IR sensor built in.
-
CD-i 450
- Burn:Cycle Activated
- Posts: 27
- Joined: Thu Jul 16, 2009 2:03 am
- Location: Sweden
Post
by CD-i 450 » Sun Jul 25, 2010 11:43 am
Bas wrote:rel/abs sounds like 'relative/absolute'...I can make a guess: Perhaps it changes the way of measuring when there are, for example, a lot of incandescent lamps in the room, which can disturb the IR measuring. Switching to relative might do the trick. But that's a guess!.
Yeah I think your right about that , makes sense.
I'm gonna go digging for some RC6 remote controls and hope that they work, very interesting site on the subject:
http://www.sbprojects.com/knowledge/ir/rc6.htm
-
proxy10
Post
by proxy10 » Thu Jun 30, 2011 7:44 am
thx u info ,d
-
Trev
- Sum Zero Barman
- Posts: 289
- Joined: Fri Oct 20, 2006 10:22 pm
Post
by Trev » Thu Jun 30, 2011 2:39 pm
A year old post bumped w/broken English spam ...
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)